Stainless Steel 2205 Duplex Sheet Manufacture
Stainless Steel 2205 Duplex Sheet are generally supplied with either cold rolled 2B finish or No. 1 hot rolled finish (annealed and pickled). In addition, to 2B finish we can also offer Stainless Steel 2205 Duplex Sheet with No.4 or Matte finish, BA or Mirror No. 8 finish, with PVC coating. Duplex 2205 Stainless Steel Sheet Suppliers, Factory Description of Duplex 2205 Stainless Steel Sheet. 2205 is a duplex (austenitic-ferritic) stainless steel that contains about 40-50% ferrite in the annealed state. 2205 is a practical solution to the problem of chloride stress corrosion cracking encountered by 304 / 304L or 316 / 316L stainless steel. 2205 Duplex Stainless Steel, 2205 Hot Rolled Stainless 2205 duplex stainless steel thermoforming We recommend forming should be done below 600 ° F. During thermoforming, the entire workpiece should be heated as a whole, at a temperature in the range of 1750 ° F to 2250 ° F, and the 2205 duplex is very soft at this temperature. If the temperature is too high, 2205 alloy easy to hot tear. 2205 - Rolled Alloys, Inc.2205 2205 is a duplex (austenitic-ferritic) stainless steel containing about 40 - 50% ferrite in the annealed condition. 2205 has been a practical solution to chloride stress corrosion cracking problems experienced with 304/304L or 316/316L stainless. Duplex 2205 Plate, ASTM A240 Type 2205 Sheet, SA